LC12B1 – EMB-1 Carbon Fibre Front Shock Tower
Product Description
Made from 3mm thick Carbon Fibre for extra strength, this front shock tower features an extra shock mount position to the outside of the original holes. The camber link postions also have and additional hole above the normal 2 holes.
The centre shock mounting hole of the shock tower is in the same place as the outer hole of the kit tower and the lower 2 camber link holes are in the same position as the kit tower.
The raised camber link position helps increase the weight transfer in the higher speed bends to increase corner speed. The tower has 3 camber link positions each side instead of the 2 present on the kit tower allowing for even more fine tuning.
We think the design of our towers is far more aesthetically pleasing than the original tower and the finishing touch to this front tower is the bigger hole in the centre to channel more air over the bodyshell of the car, this is especially useful when running a cab forward type shell.
Additional Information
| Weight | 10 g |
|---|---|
| Dimensions | 60 × 50 × 4 mm |
Related products
-
Details
Pack of 5 stronger CVD pins. These pins are made from high grade stainless steel and unlike the slotted pins in the original drive-shafts the Thumbs Designs pins are solid
£10.99
5 in stock (can be backordered)
